Injection Molded Plastics
Injection molding内蒙古快3-首页 is a manufacturing process for producing parts in which material is injected into a mold. The material for the desired piece is poured or pumped into a heated barrel, where it is mixed to a homogeneous consistency and then forced into the mold's cavity, where it will cool down and harden until the finished piece has solidified in the shape of the mold.
内蒙古快3-首页 Because of this, injection molding is best utilized by manufacturers who want to make large quantities of the same part. It is of particular value for manufacturers who desire very low tolerances in the parts that are produced, as the parts-per-million defect rate of injection molding manufacturing is extremely low.
Injection molding is used primarily to create parts that would be very difficult to make by hand. Because the molds that the plastics are poured into can take very intricate shapes, it allows manufacturers to produce pieces that are designed in extremely fine detail. The mold being used is designed in a 3D modeling software program, which ensures that the mechanical engineers who are designing the part have complete control over every dimension of the finished product.
内蒙古快3-首页 Due to the low cost and efficiency with the injection molding process operates, it is utilized in a wide range of industries such as automotive parts, musical instruments, furniture, and many more. Injection molding is used to produce goods that are used in almost every single aspect of our everyday lives.
Some examples of products that are produced by injection molding include: flutes, one-piece chairs, storage containers, wire spools, bottle caps, pocket combs, plastic cups, and many more.
The Origins of Injection Molding
内蒙古快3-首页 The injection molding process was originally invented by John Wesley Hyatt and his brother Isaiah in 1872. Their original design was extremely crude compared to the current machines that are employed in the injection molding process. Their original machine functioned similarly to a large hypodermic needle, and utilized a plunger to push plastic through a heated barrel into a steel mold that had to be ground by hand.
The original injection molding process was not capable of producing anything nearly as complex or in as large of a scale as current machines can produce. Early uses for the process included buttons, combs, and collar stays.
The Evolution of the Process
The industry progressed very slowly in the years immediately following 1872. In 1903, the industry would see further advances from German chemists Arthur Eichengrun and Theodore Becker, who would invent the first soluble forms of cellulose acetate in 1903. This advancement was important due to the fact that cellulose acetate is much less flammable than cellulose nitrate, which was what was previously used.
These advances would lead the cellulose acetate being made available in a powder form, which made it much easier to transport and distribute to manufacturers. In 1919, Arthur Eichengrun would go on to patent the injection molding process based off the first modern injection molding machine.
The industry would see further rapid changes thanks to World War II, which created an overwhelming demand for mass-produced goods at extremely low prices. James Watson Hendry, an American inventor, built the first screw injection machine in 1946. This machine was vital due to the fact that it allowed a great deal of precision in regards to the rate of injection. This in turn affected the quality of the goods produced by reducing the overall rate of error.
Another important aspect that the screw injection machine introduced into the process is that it allowed the raw material to be mixed prior to injection. This would prove to be extremely important as it allowed for colored and recycled plastic to be mixed with the molten plastic and mixed to a homogeneous consistency before being injected into the mold.
Injection Molded Plastics – MSI Mold
Injection Molded Plastics – MSI Mold
Injection Molded Plastics – MSI Mold
Injection Molded Plastics – MSI Mold
Materials Utilized In the Injection Molding Process
内蒙古快3-首页 A wide range of custom plastic materials can be used in this process, and will vary depending on what the desired finished good is intended to be used for. Since 1995, the number of custom plastics available for production have been increasing at a rate of 750 per year; prior to 1995 there were about 18,000 materials available when the trend started.
Custom plastic injection molding materials usually fall into one of three groups: thermoplastics, for which you can find manufacturers on IQS Directory, thermosets, or elastomers. Mechanical and material engineers will usually weigh the pros and cons of each type of material in great detail before finally deciding on the best choice for the job. Different parameters such as material strength, chemical exposure, and intended life of the product are all taken into account.
Some well-known examples of injection mold plastic that are typically used in the injection molding process include: nylon, polyethylene, polystyrene, epoxy, and phenolic. You can check out IQS Directory's list of polyethylene plastic producers if you'd like to learn more.
Injection molders are not limited by manufacturing capabilities when it comes to material choice, and are able to fabricate a wide range of product shapes and sizes. If a mold can be made for an object, plastic molding can be used to produce a product. Everything from car bumpers to intricate medical equipment can be made using the techniques of melting the appropriate material, forcing it into a pre-made cavity and allowing it to cool.
The Properties of Materials Used In the Process
As mentioned above, the types of molten plastic that can be used in the production process fall into one of three categories: thermoplastics, thermosets, or elastomers.
内蒙古快3-首页 Thermoplastics, such as polyethylene, tend to have a high molecular weight and polymer chains that associate through intermolecular forces. What this means from a practical point-of-view is that they can be easily heated up to form molten plastic without a large amount of heat, and once they have cooled they can easily be broken down back into molten plastic again if the molding process needs to be repeated due to an error or defect. For this reason, their main advantage over the other plastic injection mold materials is cost efficiency.
A thermoset is a type of polymer that forms an irreversible polymer network upon curing from a liquid state to a solid state. Because of this, thermosets cannot be reused once they have solidified from a liquid to a solid. However, this is actually the advantage to using thermosets, such as epoxy, over thermoplastics or elastomers, as this makes thermosets incredibly durable once they have taken their final form.
An elastomer exists in a state called viscoelasticity, meaning that it is able to change shape more easily than most other solids, but still has considerable material strength. Rubber is the most commonly known example of an elastomer. The advantage that elastomers, such as nylon, have over the other two types of materials is that they tend to be extremely versatile in what they can be used for.
Injection Molding Process
内蒙古快3-首页 The plastic injection molding process starts out with the material existing in pellet form. These pellets are then fed through a hopper into a hot barrel, inside of which is a reciprocating screw. As soon as the pellets pass into the barrel, the temperature increases and the viscosity of the pellets is increased, at which point dyes or other chemical agents can be added to change the final appearance and feel of the product.
From this point, the material passes out of the barrel through a check valve, and gathers at the front of the screw. The screw is designed so that it collects exactly as much material is needed to fill the mold design. The screw is then inserted into the plastic injection mold and reciprocates until the plastic injection molding is filled with molten plastic material. Most molds will allow air bubbles to escape to avoid damaging the final product. Cooling liquids are sometimes used around the mold chamber of the machine to extract heat from the plastic and speed up the cooling process, thus saving time in overall manufacturing. The entire process can take a matter of seconds or as many as a few minutes to get one complete plastic part.
At this point, the plastic injection molding is left to cool and the screw retracts to gather material for the next round. The cooling is aided by lines pumping water or other types of coolant along the wall thickness of the plastic molding. Finally, pins in the plastic molding engage to eject the finished project from the mold.
Important Design Elements to Consider for Injection Molding
One of the biggest design elements that is necessary to consider when designing a custom injection molding process is the wall thickness of the mold design. This is a crucial parameter since the molding process depends greatly on the mold cavity and the tolerances it is designed to. If the mold cavity is improperly designed, there will not be enough pressure for the material to properly transfer from the screw to fill up the entirety of the plastic molding.
How Injection Molding can be Customized
内蒙古快3-首页 There are a great many ways that the injection molding process can be customized. The production can incorporate custom elements from start to finish, and skilled engineers can tweak every element of the molding process. The injection molding machine itself can involve many custom tooling options to produce plastic parts. Additionally, the process can involve custom injection molded plastic that is formulated by material engineers to be a perfect fit for any given job.
The Types of Equipment Used for the Injection Molding Process
The most common pieces of tooling equipment used for custom injection molded plastic will be an injection ram, a screw-type plunger, an insert molding, a process heating unit, and a material hopper. Injection molded plastic presses are typically rated in tonnage, which indicates the amount of custom plastic part pieces they are capable of producing in a day. The tonnage can vary between 1 ton to over 10,000 tons.
How the Injection Molding Process can be Customized
The process can be customized in a number of different ways. One of the more popular tooling options is to use robotic molding, which has a series of small robotic arms and sensors inspect each plastic part for defects to further ensure a high degree of quality.
内蒙古快3-首页 Another custom tooling option is to alter the insert molding material being used. By switching from steel insert molding to resin insert molding, this can increase the flow speed of the injection molded plastic. This will ultimately result in more plastic part tonnage per hour, at the risk of more defects. It is highly recommended that this tooling change only be made to a production line only after a qualified engineer has approved it.
Drawbacks of the Injection Molding Process
The injection molding process is not without its shortcomings. If the manufacturer desires to produce anything other than a plastic part, then they will have to look to another production process such as die-casting.
内蒙古快3-首页 Another drawback to the injection molding process is that it has an extremely high cost to start up. Designing a mold for the injection molding process is an extremely expensive and time consuming task. However, once the process is complete and the entire injection molding production is up and running, it becomes extremely cost effective in the long run.
How to Choose a Right Manufacturer
内蒙古快3-首页 With so many injection molding manufacturers to choose from, it can be difficult to choose the injection molding process that is right for your particular needs. While there are many good injection molding manufacturers to choose from, being good at what they do does not necessarily mean that they will be good at what you need them to do.
The most important thing to look for when choosing an injection molding manufacturer is to see what size presses they have. The key is to find out how many different sizes they're able to employ in the process, as this will directly translate into them being able to adapt to whatever your needs are. A wider variety of press sizes also means a better selection of injection molding materials and colors, and also minimizes the amount of vendors that you will have to deal with.
内蒙古快3-首页 Another important aspect to consider when choosing the right injection molding manufacturer is what their ability is to expand their process. If you anticipate your demand for parts suddenly growing, it is vital that your manufacturer be able to quickly and seamlessly be able to grow to accommodate your increased demand.
For a convenient list of manufacturers, revisit the top of this page.
Injection Molded Plastic Types
- Custom injection molding is an injection molding process in which the mold is not pre-made, but is formed specifically for the consumer’s application.
- is a two-step process in which
either the color or the material is injected first. Upon the hardening
of the material, a second color or material is injected into or around
the first shape.
- Gas-assist injection molding is a process in which
inert gas, such as nitrogen, is forced into the melt while it is entering
packing the plastic into the cavities. Gas-assisted injection molding
reduces cycle time, part weight, warpage and stress to the cooled parts,
as well as minimizing other problems.
- is the process in which plastic is injected into a mold to form a plastic
tube is then blown into a cavity mold to form a hollow part.
- is a process by which plastics parts and products are formed.
- Injection moulders are the tools and
die machines used to mold molten plastic.
- Injection molded cases are durable carrying cases made of plastic that are used to hold and transport delicate or valuable pieces of equipment and protect them from damage.
- Injection molded parts are simply parts that are made from the injection molding process. The injection molding process yields a number of different products that are utilized in a variety of applications.
- is an injection molding process in which plastic
gets injected into a cavity surrounding an insert piece just prior
to molding. Plastic insert molding results in a single piece encapsulated
by the plastic.
- Molded plastic pieces are parts that are formed by pouring heated plastic into molds.
- is a process by which plastic is heated into a malleable form and pressed into molds.
- Plastic injection mold processes are used to fabricate parts with a range of complexities, from simple shapes to precision parts of geometric complexity
- fabricate plastic products by injecting molten plastic into molds or dies.
- Plastic molding is one of the most common methods of part manufacturing.
is a process that involves multiple layers with
different orientations, providing more uniform properties to the parts
they were molded from a single direction.
- Prototype Injection Molding is a form of injection molding that is used to make short run batches, or single products used for prototype purposes.
- Rapid injection molding is primarily used in prototyping and the low-volume production of plastic parts since the production time is drastically shorter than conventional molding process.
- Reaction injection molding is an
economical option commonly used for larger, more complex polyurethane plastic and
rigid foam parts produced in small quantity.
- Thermoplastics injection molding is the most common method used to process thermoplastics, due to its ability to fabricate parts with a range of design variances, from simple shapes to high precision parts of geometric complexity.
Injection Molded Plastic Terms
– A plate that provides support
for the mold cavity block, guide pins, bushings and so forth.
– The space inside a mold into which the material is injected.
– The amount of material needed to fill a mold during a
– Channel through which a cooling medium flows
to control the temperature of the surface of the mold. Cooling channels
are located within the body of the mold.
used to package products with short shelf lives, such as bottles for
milk, juice, water and laundry products. Unpigmented HDPE bottles
are translucent and have good stiffness.
– Devices that use the force of fluids to move
the mold in the injection molding process.
– A plastic that is used
predominantly in film applications due to its toughness and flexibility.
LLDPE is the preferred resin for injection molding because of its superior
toughness and is used in items such as grocery bags, garbage bags and
– A series of steel plates,
which contain cavities into which plastic resin is injected to form a
– A relatively simple compound that can react to form a
– A test that measures the ability of molten plastic
– The temperature at which crystalline portions
of polymers melt. A material becomes soft and completely amorphous once
it reaches the Tm.
– A term that refers to the measure of resistance
to flow. For all materials, the viscosity decreases as the temperature
– A term that means
many units. These units are linked together to form chain-like structures
that give polymers unique properties.
– A very strong substance that has the lowest
density of the plastics used in packaging. PP has a high melting point,
making it ideal for hot-fill liquids.
– A very versatile
plastic that can be rigid or foamed and has a relatively low melting point.
General purpose polystyrene is clear, hard and brittle.
– Any of a class of solid
or semi-solid organic products of natural or synthetic origin, generally
of high molecular weight with
no definite melting point. Most resins are polymers.
– Materials that can be melted by heating and then
re-solidified by cooling. Blends of thermoplastics can be prepared by
– Materials that
“cure” to form solids when heated. Unlike thermoplastics,
solid thermosets do not melt when heated, so they are very useful for
high heat applications.
内蒙古快3-首页 – Device that uses mechanical links to move the mold
during the formation of injection molded plastics.
Overmolding内蒙古快3-首页- A process that is very similar to the standard injection molding process except for the fact that it combines two materials. The process is actually performed twice, making it a great option for applications where durability and reliability are required.
Injection Molded Plastic Informational Video