Vacuum forming is a simplified form of thermoforming. A sheet of plastic内蒙古快3-首页 is heated to a vacuum form temperature and shaped to a mold. It is then stretched onto the surface of the mold using a vacuum. The sheet of plastic is then allowed to cool down and ejected from the mold using the reverse pressure. This is used for transformation of plastics into different objects.
For easier removal of the formed plastic from the mold, draft angles are incorporated in the design of the mold. Mechanically or pneumatically stretching the formable sheets before applying the vacuum enables the depth of parts being formed to be adjusted accordingly. Conventionally, the suitable materials used in vacuum forming are thermoplastics.
The main purpose of a vacuum form is the formation of different objects from plastics. Some permanent objects produced in this process are protective covers and turnpike signs. The process produces a large variety of products ranging from simple packaging elements to extreme impact aircraft cockpit covers.
内蒙古快3-首页 The versatility of a vacuum former promotes its widespread application in different industries. Numerous thermoplastic materials can be transformed into different objects and shapes using the vacuum form process. Transparent materials such as acrylic are also appropriate for vacuum forming and are widely used in aerospace as passenger cabin windows. It is a low level technology that provides an easy way to mold.
Vacuum Formed Lexan Component – Engineered Plastic Products, Inc.
Vacuum Formed Plastics – Engineered Plastic Products, Inc.
Vacuum Formed Plastic Case Component – Conlet Plastics, Inc.
Vacuum Formed Plastic Component – Conlet Plastics, Inc.
Industries and Products of Vacuum Forming
A range of industries utilize the vacuum form to come up with different products as discussed here.
内蒙古快3-首页 Aeronautical manufacturers apply a vacuum thermoform to produce interior trim panels, covers and cowlings. The interior sections of NASA space shuttles are made using a thermoform machine.
A wide range of products from agricultural suppliers are manufactured from plastic materials that undergo vacuum forming. A few examples include animal containers, agricultural machine parts, flower tubs, seed trays and clear growing domes among others.
内蒙古快3-首页 With pharmaceutical manufacturers, a vacuum thermoform is applied when producing blister packs. The cavities on a blister pack are made from a sheet of plastic by using a heating element. The cavities are then covered using a seal of another plastic or aluminum foil to protect and deliver unit doses of capsules, tablets and lozenges.
内蒙古快3-首页 Building and construction industries utilize a vacuum form in the manufacture of various parts such as PVC door panels, molds for concrete paving, molded ceiling features, drainpipes, roof lights and internal door liners. Fireplaces, porches as well as other parts utilize vacuum forming products.
内蒙古快3-首页 The automotive and vehicular industries highly rely on vacuum forming for many vehicle parts including wheel hub covers, bumpers, mudguards, liners, seat backs, storage racks, ski-boxes, door interiors, windshields, protective panels, batteries and other electronic housings.
Hospitals and other medical applications depend on vacuum form for production of prosthesis, pressure masks, radiotherapy masks, parts of wheelchairs and dental castings are made from vacuum forming.
There are other industries that rely on vacuum forming to produce different elements including furniture, packaging materials, bathtubs, shower surrounds, souvenirs, point of sale displays, cosmetic cases and cutlery.
History of the Vacuum Forming Process
In the 1860’s John Wesley Hyatt discovered the process of making celluloid, the first artificial plastic. Together with his brother, they patented this plastic and discovered that it could be heated in molds to form different shapes such as sheets and rods.
Centuries earlier however, the Romans would import tortoise shells which contain keratin from the Orient. They would use hot oil to shape this material into different food utensils. It can therefore be argued that it was the Romans who discovered thermoforming because they began heat forming.
In the 20th century, the heating of plastics and forming over a mold evolved to become the thermoforming as known today. Through the 1940s and 1950s, vacuum formed plastics were first conceived as display and marketing tools that were developed from vacuum casting and molding technologies. In 1950, a machine for making articles from thin a sheet of plastic was patented.
内蒙古快3-首页 In 1964, a machine for plastic sheet vacuum forming was perfected and patented. These vacuum forming machines and thermoplastics used an older concept whereby vacuums in different forms of casting and molding were used to remove excess air. By 1970s, the technology was being advanced and perfected towards the methods we have currently.
Types and Properties of Materials used in Vacuum Forming Process
A wide range of materials are used in the process of vacuum forming. The desirable properties of a thermoplastic material for this process include low forming temperatures, good flow, thermal strength, low shrinkage upon cooling and high impact strength.
The most common materials used for a vacuum form include polyester (PET), polyvinyl chloride (PVC), high density polyethylene (HDPE), low density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), polycarbonate, acrylonitrile butadiene styrene (ABS), acrylics, and Kydex, a PVC-based thermoplastic.
With polyester, a vacuum form is easily attained at low temperatures. It is characterized by fast cycles and excellent fabricating performance. Its major use is in the production of packaging materials such as food containers, beverage containers and packages for processed meat. With PVC, food wrappers, blister packaging and vegetable oil bottles are produced. PVC is strong, tough and has good transparency and chemical resistance.
Although high density polyethylene (HDPE) can be difficult to form, it has a significant application in the production of milk bottles, cereal box liners, plastic bags and margarine tubes. Just like HDPE, low density polyethylene (LDPE) forms poorly as well. Once formed, it is suitable for production of garment bags, squeezable food bottles内蒙古快3-首页, plastic bags and shrink wraps.
Polystyrene is one of the most commonly used thermoplastics in a vacuum form. It forms easily at significantly low temperatures hence fast cycle times and no pre-drying requirement. High impact polystyrene is tough and inexpensive. However, it has a poor UV resistance hence not suitable for outdoor use. Its major application is in production of fast food trays, disposable plastic silverware, egg cartons and compact disc jackets.
内蒙古快3-首页 Acrylonitrile butadiene styrene (ABS) is a hard, rigid, adequately weather resistant material with a satisfactory impact strength. It contains a bit of rubber contents which give it improved impact resistance. ABS is applied for luggage, vehicle parts, sanitary parts and electrical enclosures. The desirable features of acrylic are its hardness, high quality thermoplastic and good clarity. Some signs, baths, sanitary ware and roof lights are made using acrylic.
Steps of the Vacuum Forming Process
The process consists of placing a plastic sheet in its cold state into the forming clamp area. A heat element is used here to the desired temperature such that the plastic can be formed. A mold is raised from below to form different products with the hot plastic. Trapped air is removed by use of the vacuum system. Cooling follows with a reverse air supply being activated for the release of the plastic from the mold. This process comprises of seven main steps: clamping, heating, sheet level, pre-stretch, vacuum, plug assist and cooling and release.
It is essential that the frame used is sufficiently powerful in order to hold plastic sheets firmly during the process. The frame should be able to handle the thickest plastics that will be formed on the vacuum form machine.
Typically, the heaters used in this process are infrared elements placed in an aluminum plate. Regardless the materials used, the best vacuum form results are obtained the plastic sheet is heated uniformly throughout its thickness and the surface area. Quartz heaters are used in the more sophisticated processes. They have a lesser thermal mass, and thus enable a faster response time.
The heating process utilizes pyrometers which provide accurate control of the heating temperatures. They sense the melting temperature of the materials being heated and interact with the control of the operating process. Pyrometers work together with a computerized system that provides precise temperature readouts.
内蒙古快3-首页 This is the third step in the vacuum form process although it is not found in all machines. It utilizes a photo-electric beam that scans between the bottom heater and the plastic sheet being heated. This is used to determine whether the plastic sags down to break the beam. If it does, a small volume of air is injected to lift the sheet and stop the sagging.
It is the fourth step and also unavailable in some machines. Pre-stretching is carried out once the plastic reaches the vacuum form temperature (plastic state). This ensures that there is an even wall thickness once the vacuum is applied. The method used to control the bubble height should ensure consistent results are obtained.
The actual vacuum is applied at this step. After pre-stretching the materials, a vacuum is applied to aid in the formation of the sheet. The air trapped in between the mold and the plastic sheet is removed by a vacuum pump. The vacuum pumps used must maintain a differential pressure of about 27mm of mercury. With a larger thermoform machine, vacuum reservoirs are used together with large volume vacuum pumps内蒙古快3-首页. This process allows for a two stage application of vacuum, hence rapid molding the heated materials.
Plug Assisted Vacuum Forming
It is the step that follows the application of the vacuum especially when the straight vacuum forming does not distribute a plastic sheet evenly over the mold. It is not available in some machines. The plug pushes the plastic sheet into the mold before application of the vacuum to make it spread more evenly. This enables the materials to reach to the bottom of the mold preventing them from thinning out.
Cooling and Release
内蒙古快3-首页 This is the last step in a vacuum form process. Upon forming, the plastic is allowed to cool before it is released. When the release is done too early, deformation of the mold occurs resulting in a rejected product. The cooling process is made more rapid by fitting and activating fans and mist sprays once the product is formed. The cooling temperatures are controlled to ensure a uniform cooling and release of the formed parts.
Finally, trimming and finishing is carried out whereby excess materials are removed. Finishing also involves processes such as drilling of holes, cutouts and slots as well as decoration, printing, strengthening and assembly.
Designs and Customization
The vacuum plastic thermoforming process is similar in most machines. However, several customizations are made to meet particular requirements. For instance, the mold used to form the parts can be a male (protruding) or female (recessed). The parts and articles being formed determine the mold that will be used.
A pressure form process is quite similar to the vacuum forming only that pressure thermoforming utilizes the vacuum environment together with an additional air pressure that increases tightness of the plastic sheet on the mold. This is used in creation of very detailed vacuum formed plastics.
Machinery and Customization
内蒙古快3-首页 A specific tooling and machinery is used in the process of vacuum forming. These are used for both the primary production of the parts and secondary customization before they are made ready for the customer. The tools and equipment used depend on the type of product, size, thickness and the quantity needed.
Trimmers, scalpels and heated knives are used for finishing and trimming the product into the desired specifications. Other machines used for trimming include vertical and horizontal band-saws, roller-presses, guillotine, punch press and hand held power routers. CNC machning companies offer services that are precise in drilling of holes and creation of other customization features on injection molded plastics.
内蒙古快3-首页 Customization is done through embossing and engrossing of various marks and texts as specified by the customer.
Benefits of Vacuum Forming
The popularity of vacuum form can be explained by its advantages. Products formed through vacuum forming process are precise to their design specification. The one heated sheet allows for exactness of the specified design, a desirable feature for products designed to fit with each other.
The plastic vacuum forming is cost effective because the materials used are inexpensive, low pressures are required and the tools are less intricate. Certain items can be produced with a single sheet of plastic reducing the quantities cost. Recycling of already used plastic further contributes to cost saving.
内蒙古快3-首页 The vacuum form process is versatile and flexible allowing creation of unique products and shapes. The quicker turnaround time is attractive for business because time can be invested somewhere else to perfect the operations and profits.
Choosing the Right Manufacturer
There are many manufacturers in the vacuum forming plastic industry. Any good manufacturer can be found but it is essential for a customer to get the right manufacturer. The right manufacturer ensures that all needs of the client are met. When a custom plastic is needed, the right manufacturer will be able to deliver it.
Vacuum Forming Types
- Blister packs are clear plastic, nonresealable packaging used for products that could be tampered with.
- Clamshells are plastic packages that have hinges to open and close like a clam’s shell.
is like snapback forming except
that the thermoplastic sheet is stretched to the base of the mold.
In both cases, the use of air to stretch the material prior to vacuum
sealing and application to the mold permits the material to thin uniformly.
- Plastic covers are vacuum formed plastics designed to secure, contain and protect objects from environmental conditions such as weather, lighting, dust, water or other debris.
- Plastic forming is a group of manufacturing procedures that take thermoplastics and form them through molding processes into a wide variety of plastic products for numerous industrial, commercial and domestic applications.
- Plastic packaging encompasses all storage or containment devices produced through the manipulation of any number of polymer resins.
- Plastic trays are shallow platforms with raised edges intended to stop contents from sliding or rolling off of the surface.
is a thermoforming procedure that uses a plug or male
mold to press the heated thermoplastic material into the female mold
prior to the application of a vacuum. This method helps uniformly
distribute the sheet.
- Pressure forming is a thermoforming procedure that involves applying pressure to the
top of the plastic sheeting while the vacuum force pulls downward. Pressure
forming is done through air pressure or mechanical means, and provides
greater precision because the plastic is able to attain a greater definition
of shape in the mold.
is the process of pre-stretching the sheet
material with a vacuum box. A partial vacuum is then applied
to the box, just enough for the necessary stretching, and the mold
into the material where the box is vented to atmospheric pressure
that draws on a vacuum.
is vacuum thermoforming using only female
molds that produce a material distribution that is the opposite
of the results
obtained from male molds.
- Thermoforming involves heating and stretching plastics.
- Twin sheet thermoforming is a plastic processing technique involving vacuum forming two separate plastic sheets simultaneously before welding them together to create a hollow part or product.
- Vacuum formed plastics are created by a thermoforming process that uses a vacuum to suck the plastic sheet into a mold.
- Vacuum molding is a type of manufacturing method that takes thermoplastics and forms them through a molding process into a wide variety of plastic products.
- Vacuum packaging can refer to both those items held or displayed in reduced oxygen containers and any and all packaging materials produced through vacuum forming.
Vacuum Forming Terms
– The dark particles that appear
in plastic film during thermoforming processes because of contamination.
– The characteristic of some plastics of losing their colors
when coming into contact with water or certain solvents. Also, this is
the undesirable movement of materials to the surface of plastic or into
an adjacent material.
– Thermoformed semi-rigid plastic shells, typically made
to conform to the shape of the product being packaged.
– A protrusion on a plastic part that adds strength, assists
with alignment in assembly and allows for fastenings.
– Portions of thermoformed plastic where vacuum and
heat produce an opening in weak or thin points.
– A change in the structure of a plastic material.
– The detachment of thermoformed parts, like blisters, from
one another for the next phase of the packaging procedure.
– The process of removing static electricity from
plastic so that less dust clings to it.
– The use of a steel rule die to cut finished sheets of blisters
or blister cards to create individual pieces.
– The degree to which the sidewall of a blister or
clamshell is tapered to smooth the progress of the removal from the thermoforming
mold and denesting of the blister.
– A technique that creates depressions in a specific
pattern on plastic film and sheeting.
– The tendency of thermoformed plastic
to crack under the influences of certain chemicals.
Female Mold – A concave mold, referred to as a negative or cavity mold.
– A blister
card that is scored and die cut, permitting entrapment of the blister
between the two halves of the card. This supplies a seal between two boards
or between a board and a blister flange, especially useful when blister
packaging heavy items.
Gas-flush内蒙古快3-首页 – During vacuum packaging, the chamber is flushed with nitrogen, keeping the plastic from sucking down tightly to fragile products.
– The process of joining two or more plastics together
with the application of heat and pressure.
Male Mold – A convex mold, referred to as a positive or protruded mold
– The result of inadequate contact of the plastic material
with the surface of the mold due to trapped air, moisture on the surface
of the mold or low pressure in irregular indentations on the material’s
内蒙古快3-首页– A model of an intended
part. Prototypes show the final size as well as the design.
内蒙古快3-首页 – Thermoplastic material derived from industrial
plastic scrap from a different processor.
– The flow of heated plastic
sheeting in a thermoforming procedure in which molten plastic sheets sag
before forming. The distance of the sag is determined by an electric eye
and is good for determining the forming readiness of the material.
– A heating procedure before forming a thermoplastic
sheet that involves heating both sides.
– Any plastic material,
which is not part of the product, that results from a molding procedure.
This material is typically tip scrap and can be reused.
– The construction required to create plastic sheeting,
comprised of an extruder, die, polish rolls, conveyor, draw rolls, cutter
and a stacker.
– The minute change in length or volume of a
material when subjected to heat.
– A double blister for encapsulating a product
for product visibility on two sides.
– An indentation or protrusion that hinders the removal
from a mold.
Unit Dose Packaging – medicine blister packaging in terms of single dosages for clarity purposes.
Vacuum Form Table – A machine that produces vacuum formed parts and products.
Vacuum Forming Informational Video